Skip to main content

How to Decode any IR remote ( TV,DVD,AC any other)


Decoding IR remote



Using this tutorial you can decode any Ir remote Hex code.and we can apply it our project also like home automation,robot control etc.

You need-

Arduino Uno or any other arduino board

TSOP 1738 or 1838

small bread board

jumper wire

& for test a LED


At first you have to add a library ( Download from here)


after download unzip it & paste folder to arduino library folder




connect IR sensor to arduino like above  Schematic


Now upload first code to arduino

First code--

#include <IRremote.h>

int IRpin = 8;
IRrecv irrecv(IRpin);
decode_results results;


void setup()
{
  Serial.begin(9600);
  irrecv.enableIRIn(); // Start the receiver
}  
void loop() 

{   
  if (irrecv.decode(&results)) 
    {
     Serial.println(results.value); // Print the Serial 'results.value'
      delay(10);

     irrecv.resume();   // Receive the next value
    }
}    



After this press any key on remote ,Hex code will show on serial monitor

copy hex code of any key in your choice


Now upload second code to arduino

Second code--




#include <IRremote.h>


int IRpin = 8;
IRrecv irrecv(IRpin);
decode_results results;


void setup()
{
  Serial.begin(9600);
  irrecv.enableIRIn();
  pinMode(13,OUTPUT);

}

  
void loop() 

{   
  if (irrecv.decode(&results)) 
    {
     Serial.println(results.value);
      delay(10);
      if(results.value==Your remote hex value)
      digitalWrite(13,HIGH); 
      delay(500);
      digitalWrite(13,LOW);
     irrecv.resume(); 
    }
}    


Put your coped hex code to hex value


and insert a LED to digital pin 13 of arduino like bellow  Schematic


 Now press key of your remote LED will blink







Comments

Post a Comment

Popular posts from this blog

how to make 4x4x4 led cube using arduino

To make 4x4x4 led cube using arduino you need arduino uno or arduino nano 3.0

parts list -


Arduino uno or nano
Resistor 100 ohom x4
wire
vero board ( doted or line )

header male   L shaped

cardboard

& LED 64 piece defuse led any colour


Total making process  described in this video




Connection to arduino-



Download Arduino code

Raspberry pi 3.5 inch LCD screen setup & install driver

This tutorial for beginner raspberry pi user .It is very easy way to install driver for 3.5 inch touchscreen LCD.

Before install driver You need A Raspberry pi 3B with raspbian OS because this Lcd screen works with only raspbian OS
1.FirstDownload Txt file from here
Save it to your raspberry pi desktop
2.Make sure you have internet connection on your Raspi



3.copy upper part of text from downloaded text file & paste it to terminal emulator

Now driver will install & Lcd turn on but HDMI will turn off



LCD & touch is working after automatic restart 
4.To turn off Lcd & active HDMI ,copy lower part text from Downloaded text file


paste it to terminal emulator .Now HDMI will active & Lcd turn off




This is full details video for installation driver